ATTENTION! This software update will reset the device to factory settings. Be sure to save your personal data (videos, pictures, music, etc.) on an SD card, or your PC before you begin. Your apps (free and feebased) can you download again free after the upgrade by logging on again with the original Google account, in the Google Play Store.
To perform this upgrade you need to use a standard micro SD card with at least 500 MB free space. It may remain other files on the card. This will not be deleted or changed.
Make sure that the device is still at least 50% battery remaining capacity and has completely shut off. Not only in standby mode!
First Download the file Endeavour 1000HD_V20130805.zip and unzip the file. Copy the 5 files in the root directory of the SD card.
1. insert the SD card into the device. 2. Press Volume - key and hold it down. Then press additionally the off switching button until the Blaupunkt logo appears. 3. When the display shows the Blaupunkt logo, leave the Off switching button, but hold down the volume - yet pressed for a further 3 seconds. Then you can also release. 4. In this way you begin the upgrade. This is shown by the Android robot and generates an automatic restart when the upgrade is complete. Remark: If the device switch while the update to stand-by mode (black screen), please follow the following steps: 5. Please press the power button for 1-2 seconds, after which the display will be somewhat brighter, and after about 30-40 seconds the display will begin the update (Android robot). 6. After the upgrade, the unit will start automatically by itself. Remark: The display of the black screen (standby) while the update takes place, because of the new driver installation. Please take a little patience during the upgrade process, and please don´t plug out the SD card before the automatic restart of the device.
Ovo ti je uputstvo, a zatrazi firmware na ovaj mail:
Ti im lepo napisi, koja je svrha pisanja dela u uputstvu kako se restartuje na fabricka i vrsi upgrade i to za korisnika, a ovamo ti traze da saljes u Nemacku?
Kazi da ces razgovarati sa nadredjenim zbog zablude potrosaca korisnickim uputstvom. Samo ih iscimaj na taj nacin. Ti ce pre da se useru, nego ovi nasi.
_____________________________ P8P67 Pro v.3.1/i7 2600K/16GB RAM/MSI Lightning 770/SSD HyperX 120 3K/ 1TB/3TB SATA/X-Fi xtremeGamer Fatality Pro/CM 690 II Advanced/Toughpower 775W/LG 32LD750/X360 WiFi gamepad/Zalman MFC1 Plus/CM TX3 EVO
im sorry to tell you that its impossible to send you a link to this software. we cant send any software to our customers, cause its not allowed. \
Poslao sam ima mail da cu se obratiti Nadleznim sluzbama za zastitu potrosaca kao da cu objaviti na svim meni dostupnim forumima i drustvenim mrezama da ih treba zaobilaziti prilikom kupovine zbog lose Podrske , Sada cekamo odgovor....
ma probao sam da se registrujem ali SN ide na nalepnici koja je odlepljena :(
:: Jesi li registrovao uredjaj na njihovom sajtu :: :: Imas ovde da napravis account, pa da registrujes uredjaj :: Verovatno ovde postoji firmware :: :: http://goo.gl/CdvMI :: :: ____________________________ :: P8P67 Pro v.3.1/i7 2600K/16GB RAM/MSI Lightning 770/SSD HyperX 120 3K/ 1TB/3TB SATA/X-Fi xtremeGamer Fatality Pro/CM 690 II Advanced/Toughpower 775W/LG 32LD750/X360 WiFi gamepad/Zalman MFC1 Plus/CM TX3 EVO :: ::
Broj postavljenih tema: 60274. Broj poslatih odgovora: 646091. Trenutno niste prijavljeni na PC Berzu i zbog toga imate status 'gosta'. Kao gost ne možete da šaljete poruke na Forum. Ako ste registrovani kao član PC Berze, prijavite se. Ako ste novi korisnik, molimo registrujte se da bi dobili mogućnost aktivnog učešća u radu Foruma.
