A koja ploca? A koja optika? A kako je zakačena optika(ATA ili SATA)? A kako je HD zakačen(ATA ili SATA)? Ajd neke podatke šta imaš . Šta si menjao ....blah
A zar nisi ti trebao da reinstaliras sistem kada si stavio drugu plocu? Malo je glupo menjati plocu a ostaviti stari sistem. To bi bilo isto kao kad bi hteo da stavis hard sa sistemom, vec instaliranim na jednom kompu, na drugi. Ili ne bi radilo ili bi radilo uz previse bagova... Ako si uzeo novu plocu i sve proverio kako si kacio na nju i sve je u redu, reinstall sistem. Kakav bre bios. 100% nema veze sa biosom.
GA-945PL-S3, c2d e2140 1.6Ghz (OC 2.4Ghz) 3GB Kingston ddr2 800, WD500GB, Toshiba-Samsung DVD, Sapphire ATI 4850 1gb ddr3 256 bit
kompatibilnost (te neke nove) ploce, sa (tom nekom) postojecom memorijom ... proveri support list za tu MB
Stop 0x00000050 or PAGE_FAULT_IN_NONPAGED_AREA
The Stop 0x50 message indicates that requested data was not in memory. The system generates an exception error when using a reference to an invalid system memory address. Defective memory (including main memory, L2 RAM cache, video RAM) or incompatible software (including remote control and antivirus software) might cause Stop 0x50 messages.
Ako si samo prikacio stari OS na naovu plocu, to je sigurno uzrok tvojim problemima. Ako si reinstalirao sistem, a javlja ti se ova greska, kreni sa testom memorije, procesora i graficke karte. Najcesce ovakav problem, ako nije software u pitanju, pravi neispravna memorija. Evo i clanka o tome: Stop 0x00000050 or PAGE_FAULT_IN_NONPAGED_AREA
The Stop 0x50 message indicates that requested data was not in memory. The system generates an exception error when using a reference to an invalid system memory address. Defective memory (including main memory, L2 RAM cache, video RAM) or incompatible software (including remote control and antivirus software) might cause Stop 0x50 messages.
Possible Resolutions:
# If you added new hardware recently, remove and replace the hardware to determine if it is causing or contributing to the problem. Run diagnostics software supplied by the hardware manufacturer to determine if the component has failed.
# Stop 0x50 messages can also occur after installing faulty drivers or system services. If the file name is listed, you need to disable, remove, or roll back that driver. If not, disable the recently installed service or application to determine if this resolves the error. If this does not resolve the problem, contact the hardware manufacturer for updates. Using updated drivers and software is especially important for network interface cards, video adapters, backup programs, multimedia applications, antivirus scanners, and CD mastering tools. If an updated driver is not available, attempt to use a driver from a similar device in the same family. For example, if printing to a Model 1100C printer causes Stop 0x50 errors, using a printer driver meant for a Model 1100A or Model 1000 might temporarily resolve the problem.
Microsoft KB articles:
STOP 0x00000050 PrtSeqRd deferencing null device object STOP 0x50 Error starting Windows after connecting a scanner
Broj postavljenih tema: 60436. Broj poslatih odgovora: 647772. Trenutno niste prijavljeni na PC Berzu i zbog toga imate status 'gosta'. Kao gost ne možete da šaljete poruke na Forum. Ako ste registrovani kao član PC Berze, prijavite se. Ako ste novi korisnik, molimo registrujte se da bi dobili mogućnost aktivnog učešća u radu Foruma.
