``Max temp you don`t want to go past: 75C Max voltage you don`t want to go past: 1.4V
As for overclocking, you have to increase the FSB (little by little. Don`t go from 200 to 250 in one shot. Add 10-20 each time) and then when the PC starts to crash or reboot, add some voltage, though don`t go higher than 1.4V.
Download CPU-Z, Core Temp and OCCT. The first two are information programs that will be useful for seeing what you`ve accomplished so far including temps, the OCCT is a stress testing software that you will need to run for about 30minutes after each overclocking to see if it`s stable enough to continue. For the final version of your overclock, you run OCCT for 12 hours to see if everything is well overclocked and stable.
Broj postavljenih tema: 60436. Broj poslatih odgovora: 647769. Trenutno niste prijavljeni na PC Berzu i zbog toga imate status 'gosta'. Kao gost ne možete da šaljete poruke na Forum. Ako ste registrovani kao član PC Berze, prijavite se. Ako ste novi korisnik, molimo registrujte se da bi dobili mogućnost aktivnog učešća u radu Foruma.
