Ne može, ne zbog memorije, već zbog fizičkog broja pinova(odnosno rupa) kojih je za AM3 CPU, odnosno socket manje nego kod AM2 platforme, što znači da procesor koji je AM2 i ima 940 pinova ne može da padne na AM3 socket koji ima 938 rupa za pinove.
Crosshair IV Formula/X6 1055T & Prolimatech Super Mega & push&pull/2x2GB Geil Ultra Plus/XFX GTX 260/Barracuda 1TB 32MB/Corsair 600T & CFT-600-14CS
Socket AM3 breaks compatibility with AM2/AM2+ processors due to a subtle change in key placement. The AM3 socket has 941 pin contacts[1] while current AM3 processors have only 938 pins. Tom`s Hardware removed the two obstructing key pins from an AM2+ Phenom processor in order to fit it into an AM3 socket. The processor did not work in the AM3 socket, but still worked in an AM2+ socket, suggesting that compatibility issues run deeper than merely the key pins.[3] It is likely due to the fact that the built-in memory controller in AM2/AM2+ processors only supports DDR2 (unlike AM3 processors, which supports both DDR2 & DDR3 memory).[4]
As AM3 processors also support DDR2, they are backwards-compatible with Socket AM2/AM2+, contingent upon a BIOS update for the motherboard. Manufacturers including Asus,[5] Gigabyte,[6] and others have labeled existing AM2/AM2+ boards as being `AM3 Ready` or similar, indicating that BIOS support is provided for the specified boards. This allows existing AM2/AM2+ systems to upgrade the CPU without having to upgrade any other components.
Ako se ja ne varam ovo (GA-MA74GMT-S2) je AM3 ploca a na njoj sasvim lepo radi 5400+... Tako da mislim da moze... Mozda zavisi od modela do modela ali definitivno postoji varijanta... Ovo radi sa DDR2 mem na 800, ne znam da li bi radilo za DDR3...
Broj postavljenih tema: 60436. Broj poslatih odgovora: 647768. Trenutno niste prijavljeni na PC Berzu i zbog toga imate status 'gosta'. Kao gost ne možete da šaljete poruke na Forum. Ako ste registrovani kao član PC Berze, prijavite se. Ako ste novi korisnik, molimo registrujte se da bi dobili mogućnost aktivnog učešća u radu Foruma.
